Thursday, December 14, 2017
Home > Pets & Animals > The Ultimate Guide to Maintenance

The Ultimate Guide to Maintenance

Tips on Floor Cleaning,Stripping and Waxing

We all want to live in clean habitable environments. Keeping the floor looking nice and clean can be a little challenging especially when you don’t have a clue how to approach the process. If you want your floor to keep looking clean,well maintained and attractive,there are a few things that you need to do on a regular basis. Just about anyone can mop clean a floor,some times,but there are some other processes that are performed on floors such as stripping that require a certain level of expertise.You may handle the cleaning and restoration exercise yourself if you have the practical experience required to handle it right. For those people without the time or the experience to handle the processes,there are trustworthy floor maintenance technicians who will be more than happy to solve this problem in Lubbock. This article will attempt to explain the three floor maintenance processes of cleaning,stripping and waxing,in the hope that this knowledge will help you do a better job.

Sweeping and dusting a floor is usually all you need to do to get your floor looking clean and glossy. Get into the habit of cleaning off spills and messes as soon as they happens to avoid having to do a heavier job later on. Vacuum cleaners can be used to do a more thorough job in less time.

Have floor mats in areas with high traffic or where there is exposure to elements of the weather. Did you know you could use the usual acetone-based nail polish to wash away adamant stains from your floor? Ensure that the brush or mop you use on your floor doesn’t cause scratches and other damage to your floor. Floor scrubbers are suitable for commercial and industrial use. Ask your retailer for advice on the best cleaning solution for your specific floor surface.

Stripping follows after cleaning. This process removes deep scratches or dirt that has become embedded onto the surface. Insure that the stripping chemical you use is one that the manufacturer recommends for your floor. It is time to apply the stripping chemical;use a mop to do this. You will then need to use your scrubbing machine to thoroughly scrape any wax buildup. Use either a squeegee or a wet-dry vacuum machine to suck away the wax and the stripping solution. Clean your floor using a mop and water and allow it to dry.

Put some wax into a bucket,dip the head into the solution but make sure there isn’t too much wax on the mop;apply a thin layer of wax on your floor from the farthest place ,working towards the exit. Apply 2-5 wax layers,depending on your floor and preference. Buff the floor after the wax has dried up to a fine,glossy shine.

If you really don’t feel like committing to all this,why not call a reliable Lubbock floor maintenance specialist?

Why Floors Aren’t As Bad As You Think

News For This Month: Waxing